Library / Laws / 113th / hr / H.R. 1848 / Reported in House
IB
Union Calendar No. 109
113th CONGRESS
1st Session
H. R. 1848
[Report No.
113–151]
IN THE HOUSE OF
REPRESENTATIVES
May 7, 2013
Mr. Pompeo (for
himself, Mr. Lipinski,
Mr. Graves of Missouri,
Mr. Nolan, and
Mr. Rokita) introduced the following
bill; which was referred to the
Committee on Transportation and
Infrastructure
July 16, 2013
Additional sponsors: Mr.
Hanna, Mr. Young of
Alaska, Mr. Westmoreland,
Mr. Petri,
Mr. Barrow of Georgia,
Ms. Jenkins,
Mr. Rodney Davis of Illinois,
Mr. Huelskamp,
Mr. Cramer,
Mr. Radel,
Mr. Meehan,
Mr. Duncan of Tennessee,
Mr. Marchant,
Mr. Johnson of Ohio,
Mr. Massie,
Mr. Meadows,
Mr. Ribble,
Mr. Carson of Indiana,
Mr. Campbell,
Mr. Griffin of Arkansas,
Mr. Owens,
Mr. Bucshon,
Mr. Coble,
Mr. Collins of New York,
Mr. Webster of Florida,
Mr. Schock, and
Mrs. Bustos
July 16, 2013
Reported with an amendment, committed to the Committee of
the Whole House on the State of the Union, and ordered to be
printed
Strike out all after the enacting clause and insert
the part printed in italic
For text of introduced bill, see copy of bill as
introduced on May 7, 2013
A BILL
To ensure that the Federal Aviation
Administration advances the safety of small airplanes, and the continued
development of the general aviation industry, and for other
purposes.
1.
Short title
This Act may be cited as the
Small Airplane Revitalization Act of
2013.
2.
Findings
Congress finds the following:
(1) A healthy small aircraft
industry is integral to economic growth and to maintaining an effective
transportation infrastructure for communities and nations around the
world.
(2) Small aircraft comprise
nearly 90 percent of FAA type certified general aviation aircraft.
(3) General aviation provides
for the cultivation of a workforce of engineers, manufacturing and maintenance
professionals, and pilots, who secure the Nation’s economic success and
defense.
(4) General aviation
contributes to well-paying manufacturing and technology jobs in the United
States, and these products are exported in great numbers, providing a positive
trade balance.
(5) Technology developed and
proven in general aviation aids in the success and safety of all sectors of
aviation and scientific competence.
(6) The average small
airplane in the United States is now 40 years old and the regulatory barriers
to bringing new designs to market are resulting in a lack of innovation and
investment in small airplane design.
(7) Over the past decade, the
United States has typically lost 10,000 active private pilots per year,
partially due to a lack of cost-effective, new small airplanes.
(8) General aviation safety
can be improved by modernizing and revamping the regulations for this sector to
clear the path for technology adoption and cost-effective means to retrofit the
existing fleet with new safety technologies.
3.
FAA safety and
regulatory improvements for general aviation
(a)
Establishment of FAA
safety and regulatory improvements for general aviation
The
Administrator shall advance the safety and continued development of small
airplanes by reorganizing the certification requirements applicable to small
airplanes to streamline the approval of safety advancements.
(b)
Regulations
The
Administrator shall issue a final rule based on the FAA’s Part 23
Reorganization Aviation Rulemaking Committee (established in August 2011) by
December 31, 2015. The final rule shall meet the following objectives of the
Part 23 Committee:
(1) Create a regulatory
regime for small airplanes that will improve safety and decrease certification
costs.
(2) Set broad, outcome-driven
safety objectives that will spur innovation and technology adoption.
(3) Replace current,
prescriptive requirements contained in FAA rules with performance-based
regulations.
(4) Use FAA-accepted
consensus standards to clarify how the part 23 safety objectives may be met by
specific designs and technologies.
(c)
Consensus-Based
standards
The Administrator shall use acceptable consensus-based
standards whenever possible in the spirit of the National Technology Transfer
and Advancement Act of 1996 (15 U.S.C. 3701 note), while continuing traditional
methods for meeting part 23.
(d)
Safety
cooperation
The Administrator shall lead the effort to improve
general aviation safety by working with leading aviation regulators to assist
them in adopting a complementary regulatory approach for small
airplanes.
4.
Definitions
In this Act, the following definitions
apply:
(1)
Administrator
The term Administrator means
the Administrator of the Federal Aviation Administration.
(2)
Consensus
standards
The term consensus standards means
standards developed by voluntary organizations which plan, develop, establish,
or coordinate voluntary standards using agreed-upon procedures, both domestic
and international. These standards include provisions requiring that owners of
relevant intellectual property agree to make that intellectual property
available on a nondiscriminatory, royalty-free or reasonable-royalty basis to
all interested parties. These bodies have the attributes of openness, balance
of interest, due process, an appeals process, and consensus.
(3)
FAA
The
term FAA means the Federal Aviation Administration.
(4)
General
aviation
The term general aviation means all
aviation activities other than scheduled commercial airline operations and
military aviation.
(5)
Part
23
The term part 23 means part 23 of title 14,
Code of Federal Regulations.
(6)
Small
airplane
The term small airplane means FAA type
certificated airplanes that meet the parameters of part 23 of title 14, Code of
Federal Regulations.
July 16, 2013
Reported with an amendment, committed to the Committee of
the Whole House on the State of the Union, and ordered to be
printed